The device is a supporting facility of spark detector. When there is no high pressure water or gas in the spray extinguishing device, the booster device should be equipped with this booster device. The booster device uses a large capacity double tank, stainless steel high pressure pump, and a control frequency conversion system to provide real-time pressure source. When the water pressure in the device is insufficient, the pressure gauge will alarm in real time and connect the alarm function of the spark detector main control box. The spark detector alarm indicates low water pressure. The device is equipped with an outdoor waterproof control box, and the user can choose to place it indoors or outdoors according to the actual situation, making the equipment installation more flexible

Power specifications to ensure that the clean power supply, the voltage is AC220%V58A, the power can not be cut off 24 hours a day, (the input power supply is an independent power supply, must not be shared with the production equipment and dust box power supply) the cable is a shielded control line, the wiring requirements can not be parallel with other power wires, the cable needs to be equipped with the corresponding protection sleeve. If the pipe suction sparks, the control system will draw the corresponding relay output a passive dry contact signal, this signal can be connected to the control system of the dust control electrical cabinet, respectively chain the central dust fan shut down, to ensure the safe operation of the central dust suction equipment.